Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

NetManager UC1.0 and CCM 5.1.3

Hello,

the customer uses NetManager UC 1.0. He has configured SNMP community for CCM. The CCM is seen in the NetManager UC, but the NetManager doesn't import IP phones information from CCM. So do you know where is problem?? In the Home page of NetManager UC is seen 78 devices and 0 phones. The customer has installed license for 500 phones and 100 devices. Unfortunately the documentation about ip phone discovery in the NetManager UC is very weak:-( Thank you.

2 REPLIES
New Member

Re: NetManager UC1.0 and CCM 5.1.3

Here is the PIFServer.log from the NetManager UC. There are a lot of errors about db connectivity. What is wrong in the configuration of CCM?? Thank you.

New Member

Re: NetManager UC1.0 and CCM 5.1.3

Hi Friend,

whether the CCM discovered as Communication Manager or as the Host? Because i am also facing similar issue. But in my case CCM is getting discovered as Host where as it should be discovered as Communication Manager through SNMP...

118
Views
0
Helpful
2
Replies
CreatePlease to create content