Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

network communication problem

i have 2 different networks, one network 10.10.0.0/16 in which i use a 1721 cisco router with ip address 10.10.22.50/16, and a second network 10.100.51.0/24 with another non cisco router with ip address 10.100.51.4/16.

i am trying to set up a configuration, so a client pc ,in first network, with ip address 10.10.1.1/16 can communicate with a server, in the second network, with ip address 10.100.51.253/24.

can anyone help me?

1 REPLY
Bronze

Re: network communication problem

Step1) You have to connect the two routers with a third network.

ClientPC---network1(10.10.0.0/16)---Cisco Router---network3---Non Cisco Router---network2(10.100.51.0/24)---Server

Step 2) Enable IP routing in both routers

Step 3) Enable Routing Information Protocol in both routers

http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800ca569.html

Step 4) In each router advertise the networks directly connected to it.

88
Views
0
Helpful
1
Replies