Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Network Monitoring Tool - Urgent

Please please can anyone recommend a downloadable network Monitoring too that I can use the measure the bandwidth usage of our serial lines.

I want to be able to install this on a laptop or PC, attach it t the Ethernet interface of a router and then measure the serial Link bandwidth usage.

Thanks

8 REPLIES
Bronze

Re: Network Monitoring Tool - Urgent

I suggest you the STG (SNMP Traffic Grapher) software.

It's free and so simple, you can download from below link :

http://www.wtcs.org/informant/stg.htm

Mehrdad

New Member

Re: Network Monitoring Tool - Urgent

Thanks. I have downloaded it but how do I get it to measure bandwidth parameters on the serial link?

Thanks

New Member

Re: Network Monitoring Tool - Urgent

Thanks. Please can you let me know where I can get the OID for Serial Link line.

Thanks

Bronze

Re: Network Monitoring Tool - Urgent

I suggest you another software which called GETIF, it's free and has many features (with the ability to graph OID values over time, display the device's interface information, routing and ARP tables, as well as do basic port scans, Traceroutes, NSLookups, MIB Browser and IP Scans)

Also you can download many MIB files (about 650) from following sites and import them to it.

http://www.wtcs.org/snmp4tpc/getif.htm

New Member

Re: Network Monitoring Tool - Urgent

Thank you very much.

I have now installed the software and connected to my router. But it comes up with "no MIB2 compatible ports were fond on this device"

How do I rectify this?

Thanks

Red

Re: Network Monitoring Tool - Urgent

You may also want to look into MRTG: http://www.mrtg.org

New Member

Re: Network Monitoring Tool - Urgent

I would recomend NetFlow Monitor for your request -

www.crannog-software.com

Richard

CCIE | NNCSE

//

Re: Network Monitoring Tool - Urgent

you will find all the mibs available at this link

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1

I gone more granular into the file structure and this is where the mibII object folders and leafs are.

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.2.1

all the best

519
Views
5
Helpful
8
Replies
CreatePlease to create content