cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2193
Views
0
Helpful
2
Replies

New IOS>INSUFFICIENT MEMORY TO LOAD IMAGE!

americain
Level 1
Level 1

Hello

I tried to put an other IOS on a 1721 but failed in doing this.

Flash was erased before putting the new IOS on it but I keep getting the message that there is insufficient memory.

In rommon I see:

rommon 1 > dir flash:

File size Checksum File name

8555996 bytes (0x828ddc) 0xd460 c1700-sy7-mz.123-13b.bin

With meminfo I see:

Main memory size: 32 MB.

Available main memory starts at 0x10000, size 32704KB

IO (packet) memory size: 25 percent of main memory.

NVRAM size: 32KB

So there is an IOS and there is sufficient space but what is going wrong?

Who can help me?

Thanks

1 Accepted Solution

Accepted Solutions

Richard Burts
Hall of Fame
Hall of Fame

Fred

I am not sure how you determined that there is sufficient space. When I look that release up in the software advisor I find that it requires 48MB DRAM which you do not have. Either you need to upgrade the memory on the router or you need to back down to a release that will fit into 32MB.

HTH

Rick

HTH

Rick

View solution in original post

2 Replies 2

Richard Burts
Hall of Fame
Hall of Fame

Fred

I am not sure how you determined that there is sufficient space. When I look that release up in the software advisor I find that it requires 48MB DRAM which you do not have. Either you need to upgrade the memory on the router or you need to back down to a release that will fit into 32MB.

HTH

Rick

HTH

Rick

Hello Rick

I was convinced that the flash wasn't large enough but it is the ram.

Oops

Thank you for the quick response

YOur post was rated as helpful!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: