See the workaround in CSCdz24611. By enabling keep alive in httpd, you may dramatically increase performance. In addition to this, you can try setting HostnameLookups to Off in this same httpd.conf (if not already done).
The problem can still be due to disabled keep alives regardless of what machine is the client. Running the client on the server does bring the additional cost of spinning the CPU for both Java applets as well as servlets/applications. You should also be mindful of the CPU and memory usage.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...