Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

no access-class 23 in

Hi guys

I am having trouble to telnet into a cisco router remotetly.

This is part of the basic config I sent to be loaded

username cisco privilege 15 password 0 cisco

!

!

line con 0

password cisco

line aux 0

password cisco

line vty 0 4

password cisco

login local

transport input all

!

I can ping the router WAN address however I cant telnet. I was reviewing another configs which were successful and hadnt the no access-class 23 in

Any suggestions,please

Thanks

1 REPLY

no access-class 23 in

If this is a new router, some of the defaults are "access-class 23 in" and the acl that it references is "access-list 23 permit 10.10.10.0 0.0.0.255" (or something like that). Is that what you're asking?

HTH, John *** Please rate all useful posts ***
1713
Views
0
Helpful
1
Replies