Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

no mib snmpv2 in c3845-ipvoicek9-mz.124-12.bin ?

Hi,

Sorry if my question seem trivial to most of you, but i want a cisco 3845 router to send the coldstart, warmstart, linkup, linkdown traps to a network management server. I found that those traps were in the SNMPV2 MIB using snmp object locator. However when i check with MIB locator which MIBs are included in c3845-ipvoicek9-mz.124-12.bin (the image i will be using), SNMPv2 does not appear.

Does this mean i can not use those traps ? Or are they included somewhere else ?

Thanks for your help.

Nicolas.

2 REPLIES
Cisco Employee

Re: no mib snmpv2 in c3845-ipvoicek9-mz.124-12.bin ?

I just checking on my 3845 running the same code and these traps are supported in this code

Here's how you would enable them:

snmp-server enable traps snmp ?

authentication Enable authentication trap

coldstart Enable coldStart trap

linkdown Enable linkDown trap

linkup Enable linkUp trap

warmstart Enable warmStart trap

New Member

Re: no mib snmpv2 in c3845-ipvoicek9-mz.124-12.bin ?

ok thanks a lot !

i am just wondering though why this mib does not show up in the cisco mib locator with image=c3845-ipvoicek9-mz.124-12.bin (???).

is there another way to be sure that snmpv2 mib is supported inthis image beside the mib locator ?

thanks again for your help.

N.

155
Views
0
Helpful
2
Replies