Re: No models in device type selector after ACS/LMS integration
Check the Devices that are not configured in ACS report under Common Services > Device and Credentials > Reports. When integrated with ACS, all of the devices you wish to manage with LMS MUST be TACACS+ clients of the same ACS server. As long as a device appears in this report, it will not be manageable by LMS.
As for device selector changes in LMS 2.6, we have made the device selector more powerful. Device type views are still available (and should be enabled by default). Check your settings under Common Services > Device and Credentials > Device Selector Settings, and make sure the category types you want are enabled.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...