Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

No wired clients Prime 2.1

Hi all,

 

Hopefully this will be relatively simple. I have Cisco Prime 2.1. I have recently added a number of switches which are happily functioning. The problem I have is the wired client count is 0.

 

Is there something I need to enable?

 

Jamie.

1 REPLY
Cisco Employee

Hi Jamie,Prime infrastructure

Hi Jamie,

Prime infrastructure uses MIB to collect the Mac address of the clients; this MIB collects
the information per vlan.

So we need to configure SNMP context for all vlans to view the wired client.

Try configure SNMP context on devices , then delete and re-add the device and check the issue.

 

For e.g:

snmp-server group gcobergroup v3 auth context vlan-1
snmp-server group gcobergroup v3 auth context vlan-71

 

Thanks-

Afroz

****Ratings Encourages Contributors ***

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
184
Views
5
Helpful
1
Replies
CreatePlease to create content