ā10-15-2014 06:59 AM
Hi ,
I am able to create new ICMP echo IP SLA test using SNMP Set requests , but when I try to update the target address of the created test I am getting the below error
----------------------------------------------------------------------------------------------------------------------
snmpset -v2c -c password IP .1.3.6.1.4.1.9.9.42.1.2.2.1.2.19088 x "8A 2A 5E A5"
Error in packet.
Reason: inconsistentValue (The set value is illegal or unsupported in some way)
Failed object: SNMPv2-SMI::enterprises.9.9.42.1.2.2.1.2.19088
-------------------------------------------------------------------------------------------------------------------------
Above error is seen in the 7606 device running IOS Version 12.2(33)SRC6, RELEASE SOFTWARE (fc1)
In 7505 device running IOS Version 12.4(10a), RELEASE SOFTWARE (fc2) , I am able to update the rttMonEchoAdminTargetAddress object.
What could be the problem ? Could some one help.
ā10-15-2014 08:31 AM
TO configure the entire IP SLA config you need to start with row creation. If there is an prior entry recreating requires to destroy the entry and start over.
Please share all the commands which you're trying to set. If you are trying to set only this value, it may be an issue.
Following is an example to config an IP SLA operation :
rttMonCtrlAdminStatus.$101 -i 4 \
rttMonCtrlAdminRttType.$101 -i 9 \
rttMonCtrlAdminFrequency.$101 -i 90 \
rttMonCtrlAdminNvgen.$101 -i 1 \
rttMonEchoAdminProtocol.$101 -i 27 \
rttMonEchoAdminTargetAddress.$101 -o "0A 0A 0A 01" \
rttMonEchoAdminTargetPort.$101 -i $port \
rttMonScheduleAdminRttLife.$101 -i 60 \
rttMonScheduleAdminConceptRowAgeout.$101 -i 30 \
rttMonScheduleAdminRttStartTime.$101 -t 1
-Thanks
Vinod
**Encourage Contributors. RATE Them.**
ā10-15-2014 10:17 AM
My requirement is to update the existing test with new target address , as the other values remain same. This updation is working in 7505 device running IOS Version 12.4(10a), but getting an error in 606 device running IOS Version 12.2(33)SRC6.
The permission of rttMonEchoAdminTargetAddress is read-create , so one can set value on this object . This set is failing on some devices .
ā10-15-2014 11:23 AM
Do you have any operation configured # "19088"? Do you see any output with show ip sla statistics 19088?
-Thanks
Vinod
ā10-15-2014 07:00 PM
Yes , I have configured ,
#sh ip sla statistics 19088
Round Trip Time (RTT) for Index 19088
Latest RTT: Unknown
Latest operation return code: Unknown
Latest operation start time: Unknown
Number of successes: 1
Number of failures: 0
Operation time to live: 0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide