Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

not ableto add a device in cs -- already exists !!!

Hi Joe,

I have a router-1841(with ip address 10.201.127.35) on the perimeter

side, and then a firewall behind the router. CW server (LMS 3.0) is

connected on the DMZ network and in the firewall ip any any is

configured on all the interface ACLS. I am able to manage all the

router/switches behind the inside interface networks.

Now the issue is the router-1841 as mentioned above, im not able to

add it in common services, saying that record for this already

exists and comes in  error devices as attached here in this case.Pls

find the same and verify it.

I have checked the snmp configuration in this router and everything

is normal as the other devices have.

Im attaching almost all the log files here in the zipped format.


For security perspective the ip addresses are modified and hence not

the real ones.


Can you please check it out nad let me know on this at the earliest.

regards
rajesh

5 REPLIES
New Member

Re: not ableto add a device in cs -- already exists !!!

hi joe...pls help

Cisco Employee

Re: not ableto add a device in cs -- already exists !!!

Is this server integrated with ACS?  Do you see this device under the Common Services > Device and Credentials > Reports > Devices not configured in ACS report?

--

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com

New Member

Re: not ableto add a device in cs -- already exists !!!

hi joe..

you are right...

the ciscoworks is integrated with ACS

This router is showing in "devices not integrated with ACS under report" list...

pls let me know on this..This router is not configured for ACS... customer requirement is to get the email alerts from this router.

pls update immly if possible..

regards

rajesh

New Member

Re: not ableto add a device in cs -- already exists !!!

joe, pls help..

Cisco Employee

Re: not ableto add a device in cs -- already exists !!!

You need to add the device to ACS.  LMS will only manage devices which are configured as network clients in ACS.

203
Views
0
Helpful
5
Replies
CreatePlease to create content