Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

not access http:// server_name: 1741

Hello!!!

After configuring cisco premium LMS 4.2 I do not have access to graphics mode when I type http:// cwlms42 1741 or http://192.168.1.200:1741

But I can do a ping

Thank you for help me

11 REPLIES
Hall of Fame Super Silver

not access http:// server_name: 1741

Have you checked that the Apache web server (and other application server processes) is running? Apache is the underlying server that presents the LMS GUI to your browser.

Login via ssh and type:

     show application status LMS

not access http:// server_name: 1741

Hello,

after typing show status under LMS

I like result

Apllication% lms is not installed

gold I followed the steps through deploy OVF template

Hall of Fame Super Silver

not access http:// server_name: 1741

You need to type the comand exactly as I listed - the application name is case-sensitive so be sure to capitalize LMS.

Also please confirm the exact name of the ova file you deployed.

not access http:// server_name: 1741

THE NAME OF MY FILE THAT OVA CISCO gave me is called: PNP KICKSTART-VM-1.2.11-medium_2.ova.

I followed the steps in the configuration.

not access http:// server_name: 1741

sh ver

Cisco Apllication Deployment Engine os  release: 2.0

ADE-OS BUILD Version : 2.0.1.038

ADE-OS System Architecture: x86_64

Hall of Fame Super Silver

Re: not access http:// server_name: 1741

That's your issue - you did not install LMS. You installed the Plug and Play gateway.

You need to downlaod and install LMS from this link. See screenshot below (click for bigger view). Select the two partial files (part1 and part2 for medium ova in your case) and combine them into one using the reassembly and checksum utility (listed further down on the download page) as noted in the Installation guide (here) then deploy.

not access http:// server_name: 1741

I was able to download the Windows version and lunix. lms4_2_4_win_k9

can you give me a link to how to install?

Hall of Fame Super Silver

not access http:// server_name: 1741

You said earlier you were trying to deploy the OVF format distribution. That runs on an ESXi server and includes a Linux distribution

In your latest post you said you downloaded the Windows version. That runs on a Windows 2008 R2 host.

In either case, follow the appropriate sections of the "Installing and Migrating to Cisco Prime LAN Management Solution 4.2" document found (among others) on this page: link.

not access http:// server_name: 1741

In your previous answer you asked me to download the full version. so I download the Linux and Windows release:

   - Lms4_2_4_win_k9.zip (Cisco_Prime_LAN_Management_Solution_4_2_4.tar)

   - Lms4_2_4_lnx_k9.zip (lms4_2_4_win_k9.exe)

which I should be able to use vmware?

because I know I should normally have as extension. ovf

Hall of Fame Super Silver

not access http:// server_name: 1741

Do not download or use the windows release (any file with "win" in the name) when installing soft appliance (VM).

A new installation (or upgrade on soft appliance from pre-4.2) must use the files for either standard, medium or large installation. For a standard installation (up to 500 managed devices) you would use:

     Cisco_Prime_LMS_4_2_500_OVA.part1

     Cisco_Prime_LMS_4_2_500_OVA.part2

...and combine them into one large file using the unzipped utility

     Cisco_Prime_LMS_4_2_OVA_Install.zip

and following the directions in

     Cisco_Prime_LMS_4_2_softappliance_OVA_Readme.zip

That will get you an LMS 4.2 ova file which can be deployed directly into your ESXi environment using vCenter. Detailed instructions are in the Installing and Migrating guide here:

http://www.cisco.com/en/US/customer/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/install/guide/instl.html

Once you have confirmed a working LMS 4.2 installation, you can further patch it to the current release (4.2.4) by following the separate upgrade instructions for 4.2.2, 4.2.3 and 4.2.4. They are each required separately in that order as they have the previous patch as a prerequisite. (You can skip 4.2.1 because 4.2.2 doesn't require it.) These are the tar files and their respective upgrade guides detail how to install them.

not access http:// server_name: 1741

Please follow this discussion >

https://supportforums.cisco.com/thread/2138106

888
Views
0
Helpful
11
Replies
CreatePlease login to create content