Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Notification for changes made in the devices

Hi

Want to configure ,whenever their will be any changes in configuration of the devices get notification on the server as well as on email.

How can be configure the same and need detailed description of the same.

Plse let me know the solution

Regards

Vaibhav

3 REPLIES
Bronze

Re: Notification for changes made in the devices

Hello,

I suppose that you have LMS installed on your server :)

You can configure a syslog server on your devices. This should be your LMS server.

You should configure the severity level for the syslog messages you want to send.

!

logging trap notifications ! the severity level

logging source-interface Vlan1 ! your mgmt-interface of the device

logging 10.10.10.10 ! the logging server

!

Then you have to activate the traps on the device.

If you want to enable all traps, use

!

snmp-server enable traps

!

or if you only want to get config-messages you should use

!

snmp-server enable traps config-copy

snmp-server enable traps config

snmp-server enable traps config-ctid

!

Finally you can define an email-notification under

RME -> Tools -> Syslog -> Automated Actions

Select the sysylog messages " %SYS-5-CONFIG_I " and generate an email out of it.

Greetz

Community Member

Re: Notification for changes made in the devices

Hi

i have se that..getting E-mail notification but...it is not clear what exactly changes made on the device...

It just alerting ...can i get the details what changes has been done....

Regards

Vaibhav

Bronze

Re: Notification for changes made in the devices

Hi!

I think that is not possible if you want it automatically.

You can look for differences between the old and the new config by using the config archive.

But I think that there is no way to send this differences by mail.

217
Views
0
Helpful
3
Replies
CreatePlease to create content