Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

OID for AP1230 free and used memory

We have used the following OID:

1.3.6.1.4.1.9.9.48.1.1.1.5.1 = used memory

1.3.6.1.4.1.9.9.48.1.1.1.6.1 = free memory

However, when issue show proc memory, the value obtained from the above appeared different. Can someone advise if we are using the correct OID?

1 REPLY
Cisco Employee

Re: OID for AP1230 free and used memory

These are the correct objects, but the APs add the processor and I/O memory in the show proc mem output. Therefore, you need to walk the ciscoMemoryPoolTable, and get the Used and Free for the I/O pool in addition to the Processor pool. The sum of those numbers will yield values that agree with show proc mem.

325
Views
0
Helpful
1
Replies