OID for power supply fan

[tfontano]

Hi everyone,

Is there a way to monitor the fan on the PS via snmp? any oid for this.

from sh env:

Power Supply 1 is present.

Fan status: Warning - failure

Input Voltage status: normal

DC Output Voltage status: normal

Power Supply 2 is present.

Fan status: normal [[[[[-----am interested in this fan!!!

Input Voltage status: normal

DC Output Voltage status: normal

48V Power Supply 3 is not present.

48V Power Supply 4 is not present.

Fan 1 Failed [[[[--------not this fan

Board Temperature: normal.

Appreciate your replies. Thanks.

[Joe Clarke]

What type of device is this, and what version of code is it running?

[tfontano]

Hi Joe,

c3745 router /c3745-jk9s-mz.122-8.T8.bin.

[Joe Clarke · Accepted solution]

There is no specific object for the PS fan in this version of IOS. However, it does support the ciscoEnvMonSupplyStatusTable. The ciscoEnvMonSupplyState object will give you the overall status of the power supply.

[tfontano]

Thanks Joe. Will have to contend with this. Appreciate your quick response.

[tfontano]

Got this object, caemSupplyFailedComponent, from CISCO-ACCESS-ENVMON-MIB, but i'm not getting the response from an snmpwalk that I expect. Still doesn't indicate the failure of the fan on the PS.