Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

OID information for Show Ver

I am trying to pull the same information as a Show ver, but I cannot find the appropriate OIDS for them.

Any clues?

The big ones I need.

Router type.

IOS file name running

total memory

flash memory

Thank you,

Tim

1 ACCEPTED SOLUTION

Accepted Solutions
Red

Re: OID information for Show Ver

You will have to poll a number of MIB objects.

One for example would be sysObjectID (1.3.6.1.2.1.1.2)

Also, check out this tech tip for memory utilization:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a95.shtml

Additional SNMP Tech Tips available at:

http://www.cisco.com/en/US/tech/tk648/tk362/tk605/tsd_technology_support_sub-protocol_home.html

1 REPLY
Red

Re: OID information for Show Ver

You will have to poll a number of MIB objects.

One for example would be sysObjectID (1.3.6.1.2.1.1.2)

Also, check out this tech tip for memory utilization:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a95.shtml

Additional SNMP Tech Tips available at:

http://www.cisco.com/en/US/tech/tk648/tk362/tk605/tsd_technology_support_sub-protocol_home.html

119
Views
0
Helpful
1
Replies
CreatePlease to create content