03-16-2006 09:38 AM
I am trying to pull the same information as a Show ver, but I cannot find the appropriate OIDS for them.
Any clues?
The big ones I need.
Router type.
IOS file name running
total memory
flash memory
Thank you,
Tim
Solved! Go to Solution.
03-16-2006 06:17 PM
You will have to poll a number of MIB objects.
One for example would be sysObjectID (1.3.6.1.2.1.1.2)
Also, check out this tech tip for memory utilization:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a95.shtml
Additional SNMP Tech Tips available at:
http://www.cisco.com/en/US/tech/tk648/tk362/tk605/tsd_technology_support_sub-protocol_home.html
03-16-2006 06:17 PM
You will have to poll a number of MIB objects.
One for example would be sysObjectID (1.3.6.1.2.1.1.2)
Also, check out this tech tip for memory utilization:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a95.shtml
Additional SNMP Tech Tips available at:
http://www.cisco.com/en/US/tech/tk648/tk362/tk605/tsd_technology_support_sub-protocol_home.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: