OID string for opitcal monitoring on IE-3000 switch
I posted this in the Optical forum, and it was suggested that I post it in this forum, as well.
I'm looking for the OID string on a IE-3000 switch to give me the results for the optical Tx and Rx power as shown in the "show interface transceiver" command (this is the output i ran directely from the IE-3000 switch, BTW):
Temperature Voltage Tx Power Rx Power
Port (Celsius) (Volts) (dBm) (dBm)
--------- ----------- ------- -------- --------
Gi1/1 30.1 3.29 -6.1 -7.3
The OID I am using on our 6509 switch for Rx power is .188.8.131.52.184.108.40.206.220.127.116.11.1.4.xxx (where xxx is the ifindex number), but I can't seem to find anything similar for it on the IE3000. The closest I have found are the following, but those appear to be just descriptor tags:
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...