I am looking for few options of doing out of band management for our enterprise customers so that devices can be access remotely in case of in-band link failure. Kindly guide me in this regard to find a suitable solution for out of band management.
I'm surprised you left out WTI. Rock solid product that beats the budget. If your in-band network is down usually your troubled device is the one you need access to. They have some combo units that allow out of band console access along with power reboot. You can power cycle a hosed router and watch the boot sequence both via out of band. http://www.wti.com/c-45-out-of-band-management.aspx
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...