Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Out of range component = Volt

I am getting the following error:

OutOfRange::Component=VOLT-141.1.9.1/12044 [Te2/9/3 Supply Voltage Sensor];ComponentClass=VoltageSensor;ComponentEventCode=1080;HighThreshold=5.0;Status=OK;

CurrentValue=0.0;LowThreshold=1.0;entSensorValue=0;RelativeVoltageThreshold=0.0  %;

I know that is a voltage issue on Te2/9/3 and that is is out of range but this is port trunk with not Poe.

How do you fix the issue?

5 REPLIES
Hall of Fame Super Silver

Out of range component = Volt

What platform (hardware type and software version please) is the volatage sensor on?

If you issue "show environment" on the device CLI, does the device believe the voltage to be out of range?

I ask becasue there is a known bug with ASRs, for instance, that causes similar alarms (LMS doesn't match device sensor settings).

New Member

Out of range component = Volt

Hi Marvin,

Platform: C6509VSS

Version: 122-33.SXI3

In the show environment, i don't have a problem!

I see the Bug with C2900 and Asr, ma be the problem is the same with 6500 ?

Hall of Fame Super Silver

Out of range component = Volt

It sounds like you may have found a bug with that platform. You'd have to open a TAC case to have them confirm.

New Member

Out of range component = Volt

Hi,

I noticed this error on all Ten Gig 10SR after put 6500 in VSS mode. When VSS was disabled, the errors gone.

I don't have access to TAC for my 6500, so I can't have a chance to submit a support case.

Hall of Fame Super Silver

Out of range component = Volt

Your additional description further confirms my suspicion that you're seeing a bug.

Unfortunately, without SMARTnet (TAC support) you'll just have to live with this problem. I always strongly recommend customers keep core infrastructure under a support contract.

1549
Views
0
Helpful
5
Replies
CreatePlease login to create content