Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Peer server certificate setup issue

Hi,

am having problem connecting the DCR Master(RME) to one of the DCR slave(DFM) but the master can exchange certificate with two other slaves(IPM and CM).

Can someone please tell or explain to me where i got it all wrong, I need to do this ASAP,please someone should help me,thanks.

5 REPLIES
Community Member

Re: Peer server certificate setup issue

Sorry i forgot to meantion this, the DCR Slave can copy the peer certificate of the DCR master but the DCR master refuse to copy the DCR Slave certificate.

Please i need the reply ASAP,thanks,cheers.

Cisco Employee

Re: Peer server certificate setup issue

What error do you get? In order to exchange the certs, the two servers must be reachable over the SSL port (tcp/443 by default).

Community Member

Re: Peer server certificate setup issue

Hi,

Am not getting any error but the certificate is not displaying for me to click accept and it will accept.

The DCR slave can accept the certificate of the DCR master but the DCR master can not accept the certificate of the DCR slave and no error is displayed , I tried several times but still the same.

What can I do to resolve this problem.

Thanks.

Cisco Employee

Re: Peer server certificate setup issue

What have you specified for peer's IP/address hostname and the SSL port? If you're using the default SSL port of 443, are you sure the slave is using this port for SSL? When you look at the slave's login screen, what is the URL in your browser?

Community Member

Re: Peer server certificate setup issue

Hi,

yesterday I was able to import from the DCR slave to the DCR master.

I did not do anything in particular, I just left the machine for some hours and came back enter the necessary hostname/IP address of the slave i want to import from and it imported and I click accept.

That`s all thanks for your advice,cheers.

294
Views
0
Helpful
5
Replies
CreatePlease to create content