PI 1.2 issue with generating Interface Errors and Discards Report
I am having an issue with the reporting function of Prime Infrastructure 1.2.
It simply displays the blank screen whenever I try to generate a interface errors and discards report. I know other reporting function works so it seems like PI does not have any information related to the interface status. Did anyone have to go through the same thing?
I've enabled all default snmp traps on 4500X and PI still cannot see any information related to the interface status.
Please let me know if anyone's familiar with this.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...