Hi, We have just stood up a PI 2.0 install noticed something strange when checking the configs, In the configuration archives saw a load of devices with out of sync devices (mismatched running and start up configs.)
On checking seemed the "snmp-server location xxxx" config was missing from the running but ok in the start up.
So I tested it on a device I knew had matching start up and running and the snmp-server location in it.
Seemed that once Prime had Synced the new device the command was removed.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...