I'm worry, that you are not able to do a user monitoring on this kind of device. A SNMP gives you information about interface utilisation, but no user regarding information... Could you use any netflow capable switch before/after PIX? It is the first solution. But you lost information about real source user due to NAT. The another one solution is to use two switches (or a transparent netflow probes), the first one on ISP side and the second one in your internal network...
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...