Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Please wait.. ANIServer is still initializing & JRM is down.. LMS 3.1

Hello,

The Campus Manager Home screen displays the following message for 'System Status' and 'Discrepancies':

Please wait.. ANIServer is still initializing

& the 'Recently Completed Jobs'

I have restarted the CiscoWorks Daemon via 'net stop/ net start' without success.

Also rebooted server which initially brought the 'System Status' and 'Discrepancies' to a working state but after the weekend they reverted to 'Please wait.. ANIServer is still initializing'...?

I have attached the PDshow, screenshots of the services and status screen.

Server Spec:

LMS 3.1

(Campus Manager Home Version : 4.0.10)

Windows 2K3 standard

4 x Intel Xeon 2.8GHz Proc.

4GB RAM

Please advise how to troubleshoot.

Thank you,

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Please wait.. ANIServer is still initializing & JRM is down.

IPM was choosing a random TCP port in the range required by the RmeGatekeeper. I haven't seen this before, but one way to avoid it is to set the IPM services to Manual start, then start up the IPM daemons after Daemon Manager when the box reboots.

8 REPLIES
Cisco Employee

Re: Please wait.. ANIServer is still initializing & JRM is down.

Post the output of netstat -a -n -o -b, ipconfig, and the NMSROOT/lib/vbroker/gatekeeper.cfg file from this server.

New Member

Re: Please wait.. ANIServer is still initializing & JRM is down.

Hi jclarke,

Attached as requested.

Kind Regards

Max

Cisco Employee

Re: Please wait.. ANIServer is still initializing & JRM is down.

Shutdown the IPM daemons with the command:

ipm stop

Executed from the IPM DOS prompt. Then, restart Daemon Manager. Wait 30 minutes, and jrm and ANIServer should be healthy. Once you've confirmed the error is gone, restart IPM:

ipm start

New Member

Re: Please wait.. ANIServer is still initializing & JRM is down.

Hi Jclarke,

Where do i find the IPM DOS prompt?

Cisco Employee

Re: Please wait.. ANIServer is still initializing & JRM is down.

Under Start > Programs > Internetwork Performance Monitor.

New Member

Re: Please wait.. ANIServer is still initializing & JRM is down.

Hi Jclarke,

This worked a treat! Thank you ;-)

Any idea why this occured as even after I rebooted the server several times it did not come up properly?

Please advise.

Cisco Employee

Re: Please wait.. ANIServer is still initializing & JRM is down.

IPM was choosing a random TCP port in the range required by the RmeGatekeeper. I haven't seen this before, but one way to avoid it is to set the IPM services to Manual start, then start up the IPM daemons after Daemon Manager when the box reboots.

New Member

Re: Please wait.. ANIServer is still initializing & JRM is down.

Hi Jclarke,

Thank you for your help and advice.

Kind Regards

Max

494
Views
10
Helpful
8
Replies
CreatePlease to create content