Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

policy map not show results in Cat6500

                   I have configured QoS in Catalyst 6513 for telepresence service and when I do "show policy interface gix/y" don't show the traffic is being marked.

I think that the QoS is marked the traffic correctly because I am sawing packets marked with AF41 in the next hop for that suspect that the problem is in the "show comand".

It´s normal this behaviour or it could be a IOS bug?

This is the configuration:

ip access-list extended ACLtelepresencia_in

permit ip any any

class-map match-any telepresencia

  match access-group name ACLtelepresencia_in

policy-map telepresencia_in

  class telepresencia

   set dscp af41

D08MNSSRS0#sh policy-map interface  GigabitEthernet3/13

GigabitEthernet3/13

  Service-policy input: telepresencia_in

    Class-map: telepresencia (match-any)

      0 packets, 0 bytes

      30 second offered rate 0 bps, drop rate 0 bps

      Match: access-group name ACLtelepresencia_in

        0 packets, 0 bytes

        30 second rate 0 bps

    Class-map: class-default (match-any)

      0 packets, 0 bytes

      30 second offered rate 0 bps, drop rate 0 bps

      Match: any

Regards

Alberto

Everyone's tags (6)
197
Views
0
Helpful
0
Replies
CreatePlease to create content