Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Port Err-disable report from cisco works

Hi All,

We have network of around 400 switches.

My question is, Is there any way I can pull up the report of Err-disable for all the switches on Cisoworks ( LMS 3.2).

Any help would be appricated.

Thanks,

Samir

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Port Err-disable report from cisco works

No, this is not possible because determining if a port is err-disable is not easily obtainable via SNMP.  Campus Manager's Port Attributes report will show you the operational status of ports, but err-disable ports will be down (which is indistinguishable from a port which is unconnected).

2 REPLIES
New Member

Re: Port Err-disable report from cisco works

Hello All,

Could you please help me in this case.

samir

Cisco Employee

Re: Port Err-disable report from cisco works

No, this is not possible because determining if a port is err-disable is not easily obtainable via SNMP.  Campus Manager's Port Attributes report will show you the operational status of ports, but err-disable ports will be down (which is indistinguishable from a port which is unconnected).

457
Views
0
Helpful
2
Replies
CreatePlease login to create content