Port security is giving me so much grief. I have allowed maximum of 2 mac addresses but for some reason I get several security violation syslog alerts throughout the day and these violations come from different mac addresses, while there is only one PC connected to this port Can someone explain me why would that happen and how do I avoid getting these alerts?
Here is my Port security configuration:
switchport access vlan 101
switchport mode access
switchport voice vlan 102
switchport port-security maximum 2
switchport port-security aging time 2
switchport port-security violation restrict
Syslog message generated from device chicago-6513: May 8 16:05:34 chi-6513-10.mydomain.com 18804: May 8 16:05:32.192: %PORT_SECURITY-SP-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 5854.5330.3920 on port GigabitEthernet4/14.
Syslog message generated from device chi-6513-10: May 8 14:59:37 Chicago-6513.mydomain.com 18803: May 8 14:59:35.268: %PORT_SECURITY-SPSTBY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 5853.4430.3641 on port GigabitEthernet4/14.
Syslog message generated from device Chicago-6513: May 8 14:34:41 Chicago-6513.mydomain.com 18799: May 8 14:34:39.399: %PORT_SECURITY-SPSTBY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 001a.4644.5854 on port GigabitEthernet4/14.
We are pleased to announce availability of Beta software for 16.6.3. 16.6.3 will be the second rebuild on the 16.6 release train targeted towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are looking for early feedback from custome...