Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Port Security via SNMPv3

Is it possible to manage daily port security MAC address changes via an SNMPv3 management tool?

1 REPLY
Silver

Re: Port Security via SNMPv3

You can use the port security feature to restrict input to an interface by limiting and identifying MAC addresses of the stations allowed to access the port. When you assign secure MAC addresses to a secure port, the port does not forward packets with source addresses outside the group of defined addresses. If you limit the number of secure MAC addresses to one and assign a single secure MAC address, the workstation attached to that port is assured the full bandwidth of the port. For more information refer to http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12111ea1/scg/swtrafc.htm#xtocid7

151
Views
0
Helpful
1
Replies
CreatePlease to create content