Prime 2.1 wired port attribute report, vlan report
I'm looking to run a report on prime for a customer to show them their wired inventory. I'm particularly interested in displaying switch name, switch port number, vlan assigned. I have generated a wired port attribute summary which seems to have most of the info, but the Vlan id is alway 0 instead of the correct vlan ID. AM i missing something for this?
Also if i select Device name to customize the report it keeps reverting to Device IP which is not useful for the customer!
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...