Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Prime info

Hello

Looking if Prime can cover devices i.e Routers, Switches, ASA Firewall, WLC & AP

what license is needed to upgrade from LMS to cisco prime

these features are covered in Prime

  • software image management
  • device configuration management and archiving
  • config changes using Prime
  • config audit

appreciate some feedback

cheers

CP

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Ideally almost all the above

Ideally almost all the above mentioned features are present in Cisco Prime Infrastructure. 

It (PI 2.0, to be more specific) can manage up to 18,000 routers, switches, Adaptive Security Appliances (ASAs), and access points, including the new Cisco Catalyst 3850 Series Converged Access switch and new Cisco 5760 Wireless LAN Controller.

There will be a seperate PI upgrade license and if you have SAS/Smartnet contract, you may get a PI upgrade for free, check in the Product Upgrade Tool.

For more details on the capabilities, please check the data sheet for PI 2.0 here :

http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/data_sheet_c78-729088.html

-Thanks

Vinod

**Encourage Contributors. RATE Them.**

-Thanks Vinod **Rating Encourages contributors, and its really free. **
2 REPLIES
Cisco Employee

Ideally almost all the above

Ideally almost all the above mentioned features are present in Cisco Prime Infrastructure. 

It (PI 2.0, to be more specific) can manage up to 18,000 routers, switches, Adaptive Security Appliances (ASAs), and access points, including the new Cisco Catalyst 3850 Series Converged Access switch and new Cisco 5760 Wireless LAN Controller.

There will be a seperate PI upgrade license and if you have SAS/Smartnet contract, you may get a PI upgrade for free, check in the Product Upgrade Tool.

For more details on the capabilities, please check the data sheet for PI 2.0 here :

http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/data_sheet_c78-729088.html

-Thanks

Vinod

**Encourage Contributors. RATE Them.**

-Thanks Vinod **Rating Encourages contributors, and its really free. **
Hall of Fame Super Silver

As Vinod correctly noted, you

As Vinod correctly noted, you can manage those types of devices with PI 2.x.

If you do not have SAS support on your LMS there are some upgrade SKUs your partner or reseller can refer to . They can use the BOM builder in the partner community to get that exactly right.

If you have SAS for your LMS 4.x, the upgrade is included. (If you're coming from LMS 3.x, you would have to buy upgrade SKUs.)

82
Views
0
Helpful
2
Replies
CreatePlease to create content