Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Prime Infra 2.0 High Availability

We have implemented PI 2.0 in HA. It was working fine before and now HA is failed due to some error. We could see "Read-only file system" as a reason for not joining the pair.

We tried restarting the NCS application and restarting the server as well. Also tried to remove the HA and rebuild. Now we are not even able to configure HA and contineously getting the above error.

Please suggest.

1 REPLY
Cisco Employee

Prime Infra 2.0 High Availability

This document should be helpful for you :

https://supportforums.cisco.com/docs/DOC-26689

If it doesnt help! I would recommend to open a TAC case. This is noticed on PI 2.0, which needs additional debugs and troubleshooting, which is safe with TAC.

-Thanks

-Thanks Vinod **Rating Encourages contributors, and its really free. **
227
Views
0
Helpful
1
Replies