Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Prime Infra: Add guest user to all WLC's

Hi all,

I have prime infra 2 running, with 2 WLC's v7.4

1  WLC has all the AP's, the other one sits in the same mobility group in case the first one fails (it has no joind AP's when acting as standby).

When I create a guest user in Prime Infra, it only gets created on the WLC with the AP's joined.

So WLC1 has the AP's WLC2 has none -> I create a guest user and it is added to WLC1

I do a failover, WLC1 has no AP's WLC2 has all the AP's, I create a new guest user, it is added only to WLC2

Is there a way that I can add a guest user, and it adds it to the 2 WLC's?

Thanks in advance!

Everyone's tags (3)
3577
Views
0
Helpful
0
Replies