cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
804
Views
0
Helpful
5
Replies

Prime Infrastructure 2.0 top cpu utilization

SpongeRob
Level 1
Level 1

                  We've recently installed PI2.0 and it is working well, with a small exception - the top cpu utilization only shows the wireless controllers.  is there a setting to adjust that to all devices or has anyone worked in a fix ?

thanks for your support.

1 Accepted Solution

Accepted Solutions

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi ,

check the attched screen shot and look for the same settings..

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

View solution in original post

5 Replies 5

AFROJ AHMAD
Cisco Employee
Cisco Employee

Hi ,

check the attched screen shot and look for the same settings..

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

SWEET - Thank you very much :-)

...it had potential, however the only thing to display are the wireless controllers.  ALL was selected and it onlyu displays the WCs.  What say you ?

My Prime 2.0 shows my switches along with the WLC when configured per Afroz's suggestion.

Thanks - it should be that simple - it actually had until the server was reloaded, all services are up.  I'll speak with TAC

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco