Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Prime Infrastructure 2.0 top cpu utilization

                  We've recently installed PI2.0 and it is working well, with a small exception - the top cpu utilization only shows the wireless controllers.  is there a setting to adjust that to all devices or has anyone worked in a fix ?

thanks for your support.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Prime Infrastructure 2.0 top cpu utilization

Hi ,

check the attched screen shot and look for the same settings..

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
5 REPLIES
Cisco Employee

Re: Prime Infrastructure 2.0 top cpu utilization

Hi ,

check the attched screen shot and look for the same settings..

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
Community Member

Re: Prime Infrastructure 2.0 top cpu utilization

SWEET - Thank you very much :-)

Community Member

Re: Prime Infrastructure 2.0 top cpu utilization

...it had potential, however the only thing to display are the wireless controllers.  ALL was selected and it onlyu displays the WCs.  What say you ?

Hall of Fame Super Silver

Prime Infrastructure 2.0 top cpu utilization

My Prime 2.0 shows my switches along with the WLC when configured per Afroz's suggestion.

Community Member

Prime Infrastructure 2.0 top cpu utilization

Thanks - it should be that simple - it actually had until the server was reloaded, all services are up.  I'll speak with TAC

244
Views
0
Helpful
5
Replies
CreatePlease to create content