Prime Infrastructure 2.1. Configuration template deploy problem.

[DOM.RF NOC]

Hello! I have a problem with the CLI template deployment on Cisco Prime. PI version is 2.1.

There is the following template, which contains:

logging on
logging 10.10.10.10

When I try to deploy it on the router 1800 IOS Version 12.3(14)T7 all is going well and the report I get the following:

Device

Status

Transcript

10.5.5.1

Success

configlet: logging on logging 10.10.10.10 response: terminal width 0 config t logging on logging 10.10.10.10

But, when I try to deploy the same template on the router 3825 IOS Version 15.1(4)M5, the system issues the following error:

Device	Status	Transcript

 

10.5.5.2

Failed

Error : Exception while sending interactive commands to device, Expect timeout: Failed to match expected device output due to Expect timeout current timeout 60000. Current output : Enter configuration commands, one per line. End with CNTL/Z. MAIN_VOICE_gate(config)# Current expects : (MAIN_VOICE_gate:579|MAIN_VOICE_gate:579)\([^\)]+\)#\s*\z MAIN_VOICE_gate:579#

In what may be the reason that Prime cannot deploy the configuration on IOS version 15.1?

Thank you!

[Saurav Lodh]

I see similar issue over here , please refer

https://supportforums.cisco.com/discussion/12114651/prime-infrastructure-cli-template-smartport-macro

[DOM.RF NOC]

Good day! Yes, maybe we have the same BUG

https://tools.cisco.com/bugsearch/bug/CSCub57283

but in the status written that it is Fixed and applies to releases 1.2 and 2.0, but we used version 2.1.