Prime Infrastructure 2.1. Configuration template deploy problem.
Hello! I have a problem with the CLI template deployment on Cisco Prime. PI version is 2.1.
There is the following template, which contains:
logging on logging 10.10.10.10
When I try to deploy it on the router 1800 IOS Version 12.3(14)T7 all is going well and the report I get the following:
configlet: logging on logging 10.10.10.10 response: terminal width 0 config t logging on logging 10.10.10.10
But, when I try to deploy the same template on the router 3825 IOS Version 15.1(4)M5, the system issues the following error:
Error : Exception while sending interactive commands to device, Expect timeout: Failed to match expected device output due to Expect timeout current timeout 60000. Current output : Enter configuration commands, one per line. End with CNTL/Z. MAIN_VOICE_gate(config)# Current expects : (MAIN_VOICE_gate:579|MAIN_VOICE_gate:579)\([^\)]+\)#\s*\z MAIN_VOICE_gate:579#
In what may be the reason that Prime cannot deploy the configuration on IOS version 15.1?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...