Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Prime Infrastructure 2: User Defined Field in a report

Hello,

I've got a question regarding the user definde fileds and the reporting.

Is it possible to run a report that includes the user definde fileds? I LMS it was possible to do that.

I'd like to run an inventory report the also includes the user defined fields (I've got three) for each network device (switch, router, wlan controller,...)

Thanks for your answers and suggestions.

Bastian

5 REPLIES
Cisco Employee

Re: Prime Infrastructure 2: User Defined Field in a report

Hi Bastin,

I checked the reporting option , I can only see LOCATION as one of the option for UDF.

Check the attached screen shot..

Thanks-

Afroz

[Do rate the useful post}

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

Re: Prime Infrastructure 2: User Defined Field in a report

Hello Afroj,

Location is the snmp-server location string. I mean the UDF configurable under Administration > Settings > User Defined Field. They are also visible in the Device Work Center if a device is selected.

Check my attached screen shots.

UDF_1.jpg

UDF_2.jpg

Bastian

Cisco Employee

Prime Infrastructure 2: User Defined Field in a report

Thanks for sharing the screenshot...

hummm...unfortunately  I don't see any option to used these  UDF  in Reports 

******If  anyone has a different view ,plz share with us*******

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
New Member

I wanted to fetch info of

I wanted to fetch info of VLAN assigned interfaces on a particular switch.

Can someone please help me and provide steps on how to create one.

the switch is already added to my cisco prime. but only shows info like VLAN ID , vlan name and vlan type.

I want to assign another column to that with Label = assigned interface vlan.

So my report can fetch info that which vlan and their assigned interface are active on the switch.

New Member

Hi Bastian,Did you finally

Hi Bastian,

Did you finally get a solution or workaround?

I cannot find how to include the user defined fields to the report neither. I would like the user defined fields to be shown in inventory report.

 

Thanks.

351
Views
0
Helpful
5
Replies
CreatePlease to create content