I have Prime Network 4.0 and ASR 9001 with A9K-MPA-20x1GE and IOS XR 5.1.0. Prime connects to ASR9k with Telnet, SNMP and XML, status says reachable, operational. Updated prime to latest PrimeNetwork-4.0-DP1308.
Still, Prime can not see any physical interfaces except MgmtEth (no on-board 4x10G, no 20x1G). Basically, nothing in Slot0.
Can not see any VRFs and BNG functionality configured in VRF.
Only single static route in routing table (does not show connected routes in global routing table)
What can it be?
Is it me not configuring something, or Prime Network should not be seeing this things?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.