12-07-2011 07:26 AM
Bonjour j'ai un problème avec le LMS 3.2. Le DCR Serveur ne démarre pas. Merci de votre aide
12-07-2011 08:39 AM
Please translate your posts to English:
"Hello I have a problem with the LMS 3.2. The DCR server will not start. Thank you for your help"
Make sure you comply with steps 1 through 3 of this document. If the problem remains, post a full pdshow output from the server.
12-07-2011 08:50 AM
envoyer le résultat de commande pdshow
et envoyer aussi le dcr.log et le DCRServer.log
Est-ce que il y une application anti-virus installé sur le serveur? Si oui, alors arrête cette service et d'apres le LMS (net stop crmdmgtd) et lancer LMS de nouveau (net start crmdmgtd)
12-12-2011 07:30 AM
12-08-2011 03:02 AM
My swap space is not enough. Is there another solution to get around this insufficiency?
12-08-2011 05:46 AM
You can manually assign a custom size of swap and increase it to 4GB, see:
http://www.hosting.com/support/windows-server-2008/adjust-page-file--virtual-memory-
This is a prerequisite for LMS 3.2 so it has to be set this way for proper functionality:
www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1101012
12-12-2011 07:37 AM
Hi Joel,
I increase my swap space to 5 Go but the problem remain the same.
12-12-2011 08:00 AM
The problem is here:
[ Mon Dec 12 14:09:12 GMT 2011 ] Starting DCR Server...
log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException: C:\PROGRA~1\CSCOpx\log\dcr.log (Accès refusé)
Try the reset casuser procedure found on the link I sent you before at the end under "Common Issues".
Also, it seems you are not using English locale. Only English or Japanese locals are supported for LMS:
www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1099303
I am suspecting as well possible corruption during the install, especially if you did not install with anti-virus off, DEP set correctly and with the local administrator account. It would be in your best interest to re-install a US version of Windows if you have not following the proper steps. If you installed a US version and changed the locale to French, you could just change the locale back to English assuming your installation is not corrupted.
12-12-2011 08:07 AM
It looks to me the casuser account is damaged.
If a policyserver is running in your windows domain make sure it leaves the server alone
Can you run the resetcasuser.exe utility to restore the rights. You find this file in \CSCOpx\setup\support\
After that restart server and after 15 minutes take a screenshot of the services. I should look like this
Cheers,
Michel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide