Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

problem snmp comunity cvdm 6500 with button chassis

Hi everybody i have a problem with cvdm 6500 with button chassis. i configured snmp in c6509 and installed the cvdm 6500, cvdm 6500 chassis and java packet, so when i run the cvdm and i do click in the button that say "chassis" of cvdm. it shows me the follow message:

"community string not set on the device. chassis view can not be launched."

look at my running in c6509

ip http server

ip http path bootflash:




snmp-server community public RO

snmp-server location CENTER

snmp-server contact

snmp-server chassis-id center

snmp-server enable traps tty

snmp-server host 134.x.1.96 public

snmp-server host 134.x.10.1 public

snmp-server host 134.x.15.4 public

please if somebody can help me

if somebody could tell me how do you upload the captures of cvdm 6500.

Cisco Employee

Re: problem snmp comunity cvdm 6500 with button chassis

From what I recall with CVDM you need both a read and read-write comm string configured on the switch to get the chassis view to load.

you would need something like:

snmp-server community public RO

snmp-server community private RW

CreatePlease to create content