Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

problem User tracking Prime LMS 4.2.4 and VSS 6506

Hi All,

I don't have entry User Tacking with core VSS and i don't collect user tracking in this Switch.

With Lms 4.0.1, i don't have this problem. The core are the version ios 122-33.SXI3 and LMS have mdf 1.80.

Normaly, Prime Lms 4.2 and VSS is supported, why i don't have this option ?

Thanks for reply

1 REPLY
Cisco Employee

problem User tracking Prime LMS 4.2.4 and VSS 6506

Did you check if the Data collection is completed on the device ?

If you are able to launch the topology , check if you are able see that device there ? if not check the SNMP credentilas and re-run the Data collection followed by user tracking acquistion.

If device is there is topology , try to delete and re-add the device in LMS . then run DC followed by user tracking acquistion.

Thanks-

Afroz

[Do rate the useful post]

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****
229
Views
0
Helpful
1
Replies