Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Problem with a device in DFM

I have 28xx router in DFM it is being monitored for it's WAN and uplink interfaces. ALL other interfaces have been set to false in the detailed device view, as we have an ISDN PRI for CCME installed on this router. The PRI interfaces have been set to false NUMEROUS times, but are getting set back to true for no apparent reason. What could cause them to be reset to true?

DFM is 3.1.3

CS is 3.2.0

CM is 5.1.3

RME is 4.2.0

Thanks,

Rob

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Problem with a device in DFM

This is bug CSCsz08953. A patch is available from the TAC for DFM 3.1.3.

2 REPLIES
Cisco Employee

Re: Problem with a device in DFM

This is bug CSCsz08953. A patch is available from the TAC for DFM 3.1.3.

New Member

Re: Problem with a device in DFM

Thanks Joe!

139
Views
0
Helpful
2
Replies
CreatePlease to create content