Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

problem with software management import with RME4.1.1 CWLMS3.1

Below is the output from the software management jobs

----------------------------------------

Device Name : C10K-PRE4-PHIL

Software import result - Failed

Total number of devices scheduled for image import : 1

Number of devices succeeded : 0

Number of devices failed : 1

Total time taken for Job - 3 Minutes 19 Seconds

Status of Job - FAILED

-----------------------------------------------------------------------------------------------

Starting Job: ID - 1054

Job Started At : Wed Apr 23 19:22:40 SGT 2008

Job running on : pldtpocsvr

Import Mode : Parallel

Protocol Order for Image Transfer : TFTP,RCP,SCP,HTTP

Total number of device(s) to be processed : 1

--------------------------------------------------------------------------------

Processing Device : C10K-PRE4-PHIL

Start Time : Wed Apr 23 19:23:50 SGT 2008

Device is locked for exclusive access.

The supported protocols for image transfer are: TFTP,RCP,SCP

Importing the image c10k4-p11-mz.122-33.SB.bin from the device bootflash into the Software Repository.

Image will be copied to rep_sw_8601011000045198351 using TFTP.

Successfully imported the image from device.

Total time to copy the image - 1 Minute 10 Seconds

Moving c10k4-p11-mz.122-33.SB.bin from C:\PROGRA~1\CSCOpx\tftpboot\rep_sw_8601011000045198351 to job directory.

Successfully moved to C:\PROGRA~1\CSCOpx\files\rme\jobs\swim\1054\c10k4-p11-mz.122-33.SB.bin

Image Import from Device Complete

Device is unlocked.

Failed to add c10k4-p11-mz.122-33.SB.bin.

Reason : Exception occurred while getting Image Attributes

Device Import Result : Failed

End Time:Wed Apr 23 19:25:23 SGT 2008

SWIM0036: Could not add this image to software repository.

--------------------------------------------------------------------------------

Adding Image C:\PROGRA~1\CSCOpx\files\rme\jobs\swim\1054\c10k4-p11-mz.122-33.SB.bin to Software Library

Failed to add c10k4-p11-mz.122-33.SB.bin.

Reason : Exception occurred while getting Image Attributes

What could be the problem?

1 REPLY
Bronze

Re: problem with software management import with RME4.1.1 CWLMS3

This may be RME 4.0.4 Software Repository Problems. It looks to me like there is a problem with the script it is using, or the folder to which it is trying to store the image hasn't been created.

162
Views
0
Helpful
1
Replies