Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems after RME patch to 4.0.6

After upgrading RME to 4.0.6,

The Inventory Collection jobs are failing with this error:

Can't find resource for bundle java.util.PropertyResourceBundle, key ICSJOB008

The Config Collection jobs are failing some devices with some devices being "Partially Successful" on the VLAN RUNNING config fetch, showing "Failed to establish TELNET connection"

These devices are getting configs collected via SSH, there is no telnet configured for these devices.

They were not failing prior ro the up grade and nothing has changed in the TFTP access to the devices.

Some of devices failing config collection with the "VLAN Running config fetch" are routers.

Looking in the shadow directory shows the routers had an empty config file in the "VLAN" folder under "Routers" prior to the upgrade.

9 REPLIES
Cisco Employee

Re: Problems after RME patch to 4.0.6

The ICSJOB008 error means there was a problem telling ICServer to collect the inventory for the device. This could mean that ICServer is not running or is in a bad state. You might try restarting it.

As for the VLAN failure, it sounds like you're hitting CSCsq66458. A patch is available from the TAC.

New Member

Re: Problems after RME patch to 4.0.6

Joe,

I am unable to terminate the ICServer.

'pdterm IcServer'

and

'pdexec IcServer'

does not do it, it is as if the ICServer daemon cannot be found.

Is it supposed to be in the install directory "bin" folder?

If so, it is not there, I did a search and only found the log files.

Also,

Can RME 4.0.6 br upgraded to 4.1?

or is that not included in Smartnet?

Cisco Employee

Re: Problems after RME patch to 4.0.6

Post the output of pdshow.

New Member

Re: Problems after RME patch to 4.0.6

It shows Inventory Collector is up and running.

Can RME 4.0.6 be upgraded to 4.1 with a Smartnet contract on CiscoWorks?

Cisco Employee

Re: Problems after RME patch to 4.0.6

ICServer is down. If running "pdexec ICServer" does not work, post the ICServer.log and IC_Server.log.

You must purchase the upgrade to LMS 3.x. A new license will be required. If you're considering upgrading, you should go to LMS 3.2.

New Member

Re: Problems after RME patch to 4.0.6

That looks like it did it.

On the bug, four of the items that failed were 3800 series routers and the bug fix shows the workaround for it (copy empty vlan.dat to flash), but there were a couple of 2900 series switches also.

Is it the same fix for all failing items (were not failing before upgrade)?

Cisco Employee

Re: Problems after RME patch to 4.0.6

Actually, it may be easier to simply entry vlan database on these devices, and create one bogus vlan. Yes, the workaround is the same for all devices where vlan.dat does not exist, and RME reports a failure. If the vlan.dat file DOES exist, and RME reports a failure, then there is a different problem.

New Member

Re: Problems after RME patch to 4.0.6

Joe,

REMOVED, Ignore this post.

Problems after RME patch to 4.0.6

thanks for this answer I had the same problem and solved it with your answer..

1171
Views
25
Helpful
9
Replies