Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Process Snmp (PDU Dispatcher) causes High CPU value

Hello,

I have a Catalyst Switch 6000. Inoticed that after the execution of the job inventory in LMS, and after the snmp queries reached the equipement, the cpu value reached 98-99 % due to the process : PDU DISPATCHER (what’s it ?)

I have also a script running in the switch to observe the differents logs. For exemple, when high cpu is obtained, the message bellow appear :

« %SNMP-3-INPUT_QFULL_ERR: Packet dropped due to input

« %SNMP-3-INPUT_QFULL_ERR: Packet dropped due to input

« %SNMP-3-INPUT_QFULL_ERR: Packet dropped due to input

....

Could you give me any idea or help ?

Thanks in advance.

1 REPLY
New Member

Re: Process Snmp (PDU Dispatcher) causes High CPU value

This msg is normally generated when to many snmp request overrun the buffer allocated for such requests. There are a number of things that can cause this as well as a number of known issues that can be worked around using snmp views. Without reviewing show logging and other information available in a show tech, hard to say what the best method to resolve this. Should probably open a TAC SR to troubleshoot the issue further...

Sent from Cisco Technical Support iPad App

2900
Views
0
Helpful
1
Replies
CreatePlease login to create content