Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

QOS - ASA 5505

Good morning.

I'm having trouble configuring a QoS for my network. As i have never configured QoS on ASA equipment, i dont know if my configuration os correct.

The fact is i have a video conference equipment on my internal network, with the ip address of 192.168.1.100.

All my connectios comming from 201.x.x.3 are sent for my camera inside my network. Almost like a DMZ configuration.

This is the QoS configuration, but i dont know if its correct.

Can someone read and tell me ?

acess-list ip-qos extended permit ip 192.168.1.100 255.255.255.255 any
acess-list ip-qos extended permit ip any 192.168.1.100 255.255.255.255

class-map qos
description qos policy
match access-list ip-qos

policy-map qos
class qos
  police output 1045800 1048576
  police input 256000 256000

service-policy qos interface inside

Thanks !

Everyone's tags (5)
1 REPLY
New Member

Re: QOS - ASA 5505

I don't have a clear picture of what you are doing or which direction the data's going, but you probably need to apply it for outbound traffic to the outside interface for best affect.  I don't know much about it but I followed the info in this article and helped me.

http://brian-kayser.blogspot.com/2010/10/doing-asa-quality-of-service-qos.html

Cheers.

1093
Views
0
Helpful
1
Replies