Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started.

New Member

QoS for specific host, with priority.

Hello,

I have medium understanding about configuring cisco hardware, with mostly the basic functions. Now I need to get into QoS, since we started using a web application, that has to be privileged above all other traffic. This webapp is https, and on a specific url. Can someone point me to what to do, to keep this site responsive, unregarding what other traffic is going in and/or out?

I have no understanding about QoS what so ever.

Cisco 1811 router.

  • Network Management
1 REPLY
Bronze

Re: QoS for specific host, with priority.

class-map webapp

match protocol http url https//:www.cisco.com

policy-map wan-edge

class webapp

priority 33 (put in the percentage of bandwidth you want to guarantee for the app)

class class-default

fair-queue

interface fa0/0

service-policy output wan-edge

That will apply 33 percent of the bandwidth to the webapp going out the fa 0/0 interface while treating all other traffic equally.

Please rate if this helped.

173
Views
0
Helpful
1
Replies