Cisco Support Community
Community Member

"show ip sla statistics" output

Hi, I got the following output, which is different from that in the command reference. The "Number of successes" here appears to be the number of measurements that is below threshold. It doesn't mean the successful of the measurement.

I would like to check the definitions of the outputs of this command. Please advise.

>sh ip sla statistics details

Round Trip Time (RTT) for Index 1076888578

Latest RTT: 347 milliseconds

Latest operation start time: 12:07:38.129 GMT Wed Nov 12 2008

Latest operation return code: Over threshold

Over thresholds occurred: TRUE

Number of successes: 0

Number of failures: 21

Operation time to live: Forever

Operational state of entry: Active

Last time this entry was reset: Never

Cisco Employee

Re: "show ip sla statistics" output

You are correct. The number of successes is the number of operations that complete with an "ok" result code. The definition of an "ok" result is:

"A valid completion occurred and was timed successfully."

Over Threshold means:

"A valid completion was received, but the completion time exceeded a threshold value."

CreatePlease to create content