Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Reporting on Port Bandwidth Usage & Router Utilization

I'd like to get monthly port traffic reports on 3 2950's in a cluster. I'd also like to be able to monitor 3 routers in 3 locations for bandwidth utilization.

What is not over the top expensive as there is not a lot of money to be spent?

3 REPLIES
Silver

Re: Reporting on Port Bandwidth Usage & Router Utilization

Two of my favorite free open-source products, Cricket or MRTG.

http://cricket.sourceforge.net/

http://people.ee.ethz.ch/~oetiker/webtools/mrtg/

HTH

Steve

Rate if helpful....

New Member

Re: Reporting on Port Bandwidth Usage & Router Utilization

In hindsight, I don't think I was entirely clear as to what I need. When I said I wanted to know the aggregate amount of bandwidth per port on the Cisco switches, I mean each of the 24 ports on the switches. I don't need to know the usage of port 80, 22, 23, etc. (I sure do wish I knew how to explain this easier. ;-)

Silver

Re: Reporting on Port Bandwidth Usage & Router Utilization

Your explanation was fine. Look at either of the two products I linked above. They should provide exactly what you're looking for.

HTH

Steve

391
Views
0
Helpful
3
Replies